Heat Cutting Knife*

H.S.G.O - Engel Heat Cutter. Suitable to cut and seal synthetic ropes, belts and cloth. Heats up in 8 seconds. 60 watts - VDE approved shockproof interference suppression energy saving blade temperature approximately 600'c easy exchange of blade.
Weight approximately 1000 g.

Hot Air Welder*

"Triac" Hot Air Welder"- Hand Held. Leister-Kombi Hand Welding Tool Type "Triac"
Technical Data: Double insulated. Available for 220 / 240 or 100 V ~, 960 W. The tool produces hot air which is electronically infinitely adjustable between 20 and max. 700°C independent of which nozzle has been fitted and independent of possible voltage fluctuations.
On the temperature scale supplied with each tool can be read off which hot air temperature can be set on the potentiometer without changing elements. The high temperature plug-in element has a long life and is doubly protected by photo-cell and Klixon. The airflow can be adjusted steplessly between
50 and 230 litres / minute by adjusting the air regulating slide at the back of the handle. Pressure: 300 mm (11.8") w.g (30 mbar). The noise
level is only 65 dBA. Carbon brush life with this new improved motor: about 1800 hours. This tool is suitable for the toughest workload and
weighs only 1.35 kg including 3 m cable. Dimensions: 375 x 64 mm.